Cutters Edge 2000 Series Especificações Página 1

CE 2065 RS/D6CE 2071 RS-20"CUTTERS EDGEFIRE RESCUE SAWSOperation & Maintenance2000 SERIES ... CE2065RS AND CE2071 RS ANDGUARD DEPTH GAUGE® SE

8 / CUTTERS EDGE FIRE RESCUE SAWSPull the chain around the bar to be sure the drive links areproperly seated in the drive sprocket.Now replace the out

WARNINGDo not mix the bar and chain oil with diesel orkerosene as this actually reduces its lubricatingability and does not reduce tar buildup.We reco

10 /CUTTERS EDGE FIRE RESCUE SAWSNOTENote that you must depress the safety lock on topof the handle to be able to pull the trigger (Fig. 14).The trigg

OPERATION & MAINTENANCE / 11 CUTTERS EDGE® D-8 & D-6 GUARD/DEPTH GAUGE® Installation, Operation & Maintenance CUTTERS EDGE® D-

12 / CUTTERS EDGE FIRE RESCUE SAWSThe Cutters Edge D-8 GUARD/DEPTH GAUGE® hasbeen designed, engineered and carefully tested to provideyou with increas

Fig. 16. Slip the spacers between two cutters.Position the outer section properly, with the spacersbetween the cutters on the chain. Tap it into place

14 / CUTTERS EDGE FIRE RESCUE SAWSFig. 19. Depth of cut at forty-five degrees.In Figure 19, above, the saw is set for a cut ofapproximately 2" in

After proper set-up and running-in, your Cutters Edge FireRescue Saw will be available for service. In the field, youshould follow certain procedures

16 / CUTTERS EDGE FIRE RESCUE SAWSIMPORTANTAlways operate the saw with a minimum of twopeople on the roof for safety. One should operatethe saw and th

tion.With practice, you will be able to do this quickly andefficiently.Fig. 24. Pull up and over the rafter ...Fig. 25... plunging back in on the oth

CUTTERS EDGEÆ FIRE RESCUE SAWBULLET® CHAINGUARD/DEPTH GAUGE®Copyright ©1998 Edge Industries, Inc.All rights reserved. No part of this manual may be re

LOUVERTo louver, start with a head cut perpendicular to the rafterdirection, rolling any rafters. The rafters will become the piv-ots or hinges to lou

Part ThreeMaintenanceAfter use, your Cutters Edge Fire Rescue Saw should becleaned and inspected. We recommend that you develop adepartmental standard

20 /CUTTERS EDGE FIRE RESCUE SAWSNOTEYour Titanium Rollemose guide bar has a sealedbearing in the nose and no lubrication isnecessary.THE POWER HEADNo

Detailed instructions for cleaning the filters are included inthe filter recharger kit.CYLINDER HEADNow remove the carburetor compartment cover by fir

22 / CUTTERS EDGE FIRE RESCUE SAWSENGINETYPE: Single-cylinder 2-cycle, with loopscavengingDISPLACEMENT: 4.0 cu. in. (65.1 cc)BORE: 1.89 in. (48mm)STRO

As Limited Below,Edge Industries, Inc., warrant to the original retail purchaser that this Cutters Edge Saw is free from defects in materials and work

NOTES

Please send me ()copy (copies) of Ventilation Methods and Techniques.Name:Street:City, State & Zip:ORDER FORMVENTILATION METHODS AND TECHNIQUESby

Cutters Edge OfficesP.O. Box 8463855 23rd StreetBaker City, Oregon 97814Telephone: 541-524-9999Fax: 541-524-9996Email [email protected] Coast S

CUTTERS EDGE FIRE RESCUE SAWS Operation & Maintenance Cutters Edge P.O. Box 846 3855 23rd Street Baker City, Oregon 97814

2 / CUTTERS EDGE FIRE RESCUE SAWSCUTTERS EDGE® FIRE RESCUE SAWSOperation & MaintenanceTable of ContentsINTRODUCTION ...

CUTTERS EDGE® FIRE RESCUE SAWSOperation & Maintenance ManualEdge Industries, Inc.OPERATION & MAINTENANCE / 3VENTILATION:The purpose of ventila

4 / CUTTERS EDGE FIRE RESCUE SAWSWARNINGBeware of kickback!There are two types of kickback that can be encountered with the improper use of a chainsaw

CUTTERS EDGE FIRE RESCUE SAWCutters Edge Fire Rescue Saws are shipped fully assembled. The 12", 16" and 20" RS Models come with a prote

6 / CUTTERS EDGE FIRE RESCUE SAWSPart OneSet-UpThis section will cover assembly of the saw and preparationfor operation. All necessary tools and equip

THE BAR PLATESRemove the outer bar plate. Note that the two bar platesare similar (Fig. 5) but that the inner bar plate is smaller andhas an additiona