search

Cutters Edge Guard Depth Gauge Series Manual do Utilizador Página 2

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 7
  • Índice
  • MARCADORES
    • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 1
All specifications are subject to change without notice.
Fire Rescue Saw Specifications
Chain & Circular Saws — 222
ENGINE
TYPE: Single-cylinder 2-cycle, with loop
scavenging
DISPLACEMENT: 4.0 cu. in. (65.1 cc)
BORE: 1.89 in. (48 mm)
STROKE: 1.4 in. (36 mm)
COMPRESSION RATIO: 9.4:1 (±0.3)
BEARINGS: Heavy-duty deep-groove ball
bearings on crankshaft, needle cage
bearings on connecting rod, piston pin
and clutch.
CYLINDER/PISTON: Open ported, single
ring design with four transfer ports.
CYLINDER MATERIAL: Nikasil
MAX ENGINE SPEED: No load…
12,500 RPM
IGNITION SYSTEM
TYPE: Electronic, one piece modular, CD
BRAND: FHP
SPARK PLUG: Champion CJ7Y or
equivalent
GAP: 0.020 in. (0.5 mm)
STARTING SYSTEM
ONE STEP STARTING SYSTEM WITH
COMPRESSION RELEASE
Comprised Of…
Momentary contact switch
Combined choke/throttle lock with
throttle safety guard.
AIR FILTRATION
SYSTEM: “RAM-AIR” with metered stack
TYPE: 4-stage, oil tack barrier, external
mount
SURFACE AREA: 211.4 Square Inches
MICRON RATING: < 1 micron
FUEL & ENGINE LUBRICATION
GASOLINE OCTANE RATING: Use
87 octane or higher.
FUEL MIX OIL/RATIO: With Cutters Edge
Synthetic Oil: …100:1
If petroleum base 2-cycle oil used: …50:1
FUEL TANK CAPACITY: 26.8 fl. oz.
(0.77 liters)
CARBURETOR ISOLATION
Designed to eliminate Vapor-lock and
vibration
TYPE: Air gap isolation and Bakeolite
insulation Pressurized carburetor
compartment keeps out dirt.
DRIVE SYSTEM
TYPE: Inboard, 3-shoe centrifugal clutch
STYLE: Rim & Drum System
Radially Ported to keep rim free of tar &
debris build-up… free floating to keep
chain in perfect alignment with bar
groove.
SIZE: .404 by 7 tooth
CHAIN SPEED: No Load chain speed
98.5 FPS (feet per second)
GUIDE BAR
TYPE: Solid one piece construction,
No Rivets/No Laminates… 20” and 16”
slotted for Guard/Depth Gauge.
MATERIAL
TITANIUM ALLOY, 7 mm thick;
STYLE: Roller Blade/Speed Ring with
sealed bearing.
CUTTING LENGTHS: 20”, 16” and 12”
SIZE: .404 Pitch .063 Gauge
CUTING CHAIN
CUTTERS EDGE BULLET
®
Chain
TYPE: Carbide Tipped BULLET
®
Chain
SIZE: .404 pitch .063 Gauge
CUTTING CHAIN LUBRICATION SYSTEM
TYPE: Fully automatic, adjustable
DRIVE SYSTEM: Geared to Centrifugal
Clutch
LUBRICANT: Cutters Edge “High Tack”
Bar & Chain Oil or high quality bar &
chain oil.
OIL TANK CAPACITY: 14.24 fl. oz.
(0.42 liters)
HANDLES
TYPE: Front/Top… Full Wrap (For ease of
use with gloves, from either side of saw)
Back… Flared base for kickback guard
Full isolation anti-vibration.
VIBRATION LEVELS
* FRONT HANDLE M/S2 :3, 6
* REAR HANDLE M/S2 :5, 7
(* see Note 2)
SILENCING
MUFFLER: Oversize, top ported, low
restriction with fire screen.
** NOISE LEVEL: 102dB(A) at maximum
output.
(** see Note 1)
GUARD/DEFLECTOR
TYPE: Aluminum front mount to cover
muffler and control air-flow for delivery of
cleaner, cooler air to cylinder heat
exchangers…
(Keeps engine running cooler and
reduces maintenance)
CHAIN BRAKE
TYPE: Inertia Activated
STYLE: Free-Swinging Pendulum
BREAKING TIME: < 0.20 second
GUARD/DEPTH GAUGE
®
(Optional)
(No tools needed for installation,
adjustments or removal.)
FUNCTION: Covers all the cutting chain,
allows saw operator to set depth of cut to
avoid cutting structural members.
MATERIAL: Anodized aluminum
TYPE: D6 for 16” saw… D8 for 20” saw
3-point mount, positive lock with depth of
cut scale.
DEPTH OF CUT: D6 = 6” D8 = 8”
WEIGHT
POWERHEAD ONLY: 13.9 lbs. (Dry Weight)
CE-2165RS-12”: 21.0 lbs.
CE-2165RS-16”: 21.5 lbs.
CE-2165RS-20”: 22.0 lbs.
CE-2165RS/D6: 24.0 lbs.
CE-2165RS/D8: 24.5 lbs.
STANDARD ACCESSORIES
ACCESSORIES INCLUDED WITH ALL FIRE
RESCUE SAWS
“Scrench” holder and “Scrench” tool,
complete tool kit including grease gun
and packet of grease, complete manuals,
filter oil, Cutters Edge 2-cycle oil mix,
Cutters Edge bar & chain oil, bar
scabbard (saws without D6 and D8 only)
INCLUDED WITH D6 & D8 SAWS ONLY…
Training video for Guard/Depth Gauge
assembly, operation and maintenance.
Model CE-2165-RS
ENGINE
TYPE: Single-cylinder 2-cycle, with loop
scavenging
DISPLACEMENT: 4.3 cu. in. (70.7 cc)
BORE: 1.97 in. (50 mm)
STROKE: 1.4 in. (36 mm)
COMPRESSION RATIO: 10.2:1 (±0.3)
BEARINGS: Heavy-duty deep-groove ball
bearings on crankshaft, needle cage
bearings on connecting rod, piston pin
and clutch.
CYLINDER/PISTON: Closed ported, dual
ring design with four transfer ports.
CYLINDER MATERIAL: Nikasil
MAX ENGINE SPEED: No load…
13,500 RPM
IGNITION SYSTEM
TYPE: Electronic, one piece modular, CD
BRAND: FHP
SPARK PLUG: Champion CJ7Y or
equivalent
GAP: 0.020 in. (0.5 mm)
STARTING SYSTEM
ONE STEP STARTING SYSTEM WITH
COMPRESSION RELEASE
Comprised Of…
Momentary contact switch
Combined choke/throttle lock with
throttle safety guard.
AIR FILTRATION
SYSTEM: “RAM-AIR” with metered stack
TYPE: 4-stage, oil tack barrier, external
mount
SURFACE AREA: 211.4 Square Inches
MICRON RATING: < 1 micron
FUEL & ENGINE LUBRICATION
GASOLINE OCTANE RATING: Use
87 octane or higher.
FUEL MIX OIL/RATIO: With Cutters Edge
Synthetic Oil: …100:1
If petroleum base 2-cycle oil used: …50:1
FUEL TANK CAPACITY: 26.8 fl. oz.
(0.77 liters)
CARBURETOR ISOLATION
Designed to eliminate Vapor-lock
TYPE: Air gap isolation and Bakeolite
insulation Pressurized carburetor
compartment keeps out dirt.
DRIVE SYSTEM
TYPE: Inboard, 3-shoe centrifugal clutch
STYLE: Rim & Drum System
Radially Ported to keep rim free of tar &
debris build-up… free floating to keep
chain in perfect alignment with bar
groove.
SIZE: .404 by 8 tooth
CHAIN SPEED: No Load chain speed
121.6 FPS (feet per second)
GUIDE BAR
TYPE: Solid one piece construction,
No Rivets/No Laminates… 20” and 16”
slotted for Guard/Depth Gauge.
MATERIAL
TITANIUM ALLOY, 7 mm thick;
STYLE: Roller Blade/Speed Ring with
sealed bearing.
CUTTING LENGTHS: 20”, 16” and 12”
SIZE: .404 Pitch .063 Gauge
CUTING CHAIN
CUTTERS EDGE BULLET
®
Chain
TYPE: Carbide Tipped BULLET
®
Chain
SIZE: .404 pitch .063 Gauge
CUTTING CHAIN LUBRICATION SYSTEM
TYPE: Fully automatic, adjustable
DRIVE SYSTEM: Geared to Centrifugal
Clutch
LUBRICANT: Cutters Edge “High Tack”
Bar & Chain Oil or high quality bar &
chain oil.
OIL TANK CAPACITY: 14.24 fl. oz.
(0.42 liters)
HANDLES
TYPE: Front/Top… Full Wrap (For ease of
use with gloves, from either side of saw)
Back… Flared base for kickback guard
Full isolation anti-vibration.
VIBRATION LEVELS
* FRONT HANDLE M/S2 :4, 6
* REAR HANDLE M/S2 :5, 2
(* see Note 2)
SILENCING
MUFFLER: Oversize, top ported, low
restriction with fire screen.
** NOISE LEVEL: 104dB(A) at maximum
output.
(** see Note 1)
GUARD/DEFLECTOR
TYPE: Aluminum front mount to cover
muffler and control air-flow for delivery of
cleaner, cooler air to cylinder heat
exchangers…
(Keeps engine running cooler and
reduces maintenance)
CHAIN BRAKE
TYPE: Inertia Activated
STYLE: Free-Swinging Pendulum
BREAKING TIME: < 0.20 second
GUARD/DEPTH GAUGE
®
(Optional)
(No tools needed for installation,
adjustments or removal.)
FUNCTION: Covers all the cutting chain,
allows saw operator to set depth of cut to
avoid cutting structural members.
MATERIAL: Anodized aluminum
TYPE: D6 for 16” saw… D8 for 20” saw
3-point mount, positive lock with depth of
cut scale.
DEPTH OF CUT: D6 = 6” D8 = 8”
WEIGHT
POWERHEAD ONLY: 13.9 lbs. (Dry Weight)
CE-2171RS-12”: 21.0 lbs.
CE-2171RS-16”: 21.5 lbs.
CE-2171RS-20”: 22.0 lbs.
CE-2171RS/D6: 24.0 lbs.
CE-2171RS/D8: 24.5 lbs.
STANDARD ACCESSORIES
ACCESSORIES INCLUDED WITH ALL FIRE
RESCUE SAWS
“Scrench” holder and “Scrench” tool,
complete tool kit including grease gun
and packet of grease, complete manuals,
filter oil, Cutters Edge 2-cycle oil mix,
Cutters Edge bar & chain oil, bar
scabbard (saws without D6 or D8 only)
INCLUDED WITH D6 & D8 SAWS ONLY…
Training video for Guard/Depth Gauge
assembly, operation and maintenance.
Model CE-2171-RS
Specifications are subject to change without notice
**Note 1: Equivalent noise level is, according to ISO 7182 and ISO 9207 calculated as the time-weighted energy total for noise levels under various working conditions with the
following time distribution: 1/3 idle, 1/3 full load, 1/3 full speed.
**Note 2: Equivalent vibration level is, according to ISO 7505 calculated as the time-weighted energy total for vibration levels under various working conditions with the following
time distribution: 1/3 idle, 1/3 full load, 1/3 full speed.
Cutters Edge, D8 Guard/Depth Gauge® and BULLET® Chain are registered trademarks of Edge Industries Inc. Pat 5,056,395 5,156,156 P.O. Box 1179, Julian CA 92036 USA
Vista de página 1
1 2 3 4 5 6 7

Comentários a estes Manuais

Sem comentários
  • Vitalinq Dexter AZATOM W.Tech Delco
  • Fujitsu Componentes para dispositivos de segurança MartinLogan Barras de som Artsound Alto-falantes Airaid não ONKYO Rádios
  • Acer TravelMate P648-MG Acer A1-830 Electrolux EDE1074PDW Canon MAXIFY MB2340 Sony MDR-222KD
  • Panasonic DMC-FZ28S Instruções de Operação Canon EOS C300 Manual do Utilizador Electrolux ESF9420LOW Manual do Utilizador Asus UX303LA Manual do Utilizador Zanussi ZI 1642 Manual do Utilizador

    • © 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.084 s |
    Manymanuals.com Manymanuals.de Manymanuals.fr Manymanuals.it
    Manymanuals.pl Manymanuals.cz Manymanuals.es Manymanuals-pt.com